RAID five recovery
In order to recover RAID five 1st you would like to work out RAID five configuration parameters and so recover knowledge.
RAID five array configuration consists of:
how many disks were within the RAID five
what was the disk sequence
what block size was employed in the array
at what offset the array knowledge began
what the parity pattern was employed in the RAID5
in you touch upon RAID five with delayed parity you would like to grasp the parity delay pattern additionally
in case of RAID5E and RAID5 engineering science you would like to grasp however spare blocks area unit placed on the array
All these parameters is determined each manually and mechanically. However, if you choose to recover the RAID five configuration manually you must bear in mind that this can be a really long and tedious method which needs special techincal skills.
Manual RAID 5 Recovery
The information on a way to verify the array parameters manually is given on a RAID zero recovery page. not like RAID zero, RAID five may be a redundant array and stores the parity knowledge. you would like to work out the parity position and rotation additionally to induce the total configuration of your array.
How to verify parity position
The parity placement is controlled by 2 parameters, parity position and rotation as illustrated below. to work out the parity position you must look over every of array blocks. A block that appears most not like knowledge is that the parity block.
0 comments:
Post a Comment